Embedded Files
FUJIMARU MACHINERY SOLUTIONS CO., LTD. 📞(+66)65-964-9738 📩fujimaru@fujimaru-ms.com
Energy savings can be achieved by replacing the
"air compressor" with a "blower"
Energy savings can be achieved by replacing the
"air compressor" with a "blower"
"Is pressure reduction a source of waste?"
"Is pressure reduction a source of waste?"
Are you reducing the compressed air from the air compressor (approximately 0.7MPa) down to 0.1 MPa for use in your factory?
Air compressors consume a large amount of energy to compress air to about 1/8 of its original volume.
This means you could be wasting more than half of your electricity costs.
Simply switching to a blower can reduce your annual electricity expenses by about half.
"Just by switching to a blower, you can reduce electricity costs by 50%"
"Just by switching to a blower, you can reduce electricity costs by 50%"
Are you reducing compressed air (0.69 MPa) generated by an air compressor to 0.1 MPa for tasks like water removal or chip blowing? It costs about 0.6 baht to produce 1 m³ of compressed air with an air compressor. However, with a blower, it costs only 0.22 baht.
"A blower can discharge at the required pressure directly"
"A blower can discharge at the required pressure directly"
By using a blower, pressure reduction is unnecessary, allowing you to supply the required pressure directly from the source to the endpoint. This eliminates unnecessary cost wastage.
The velocity of the air ejected from the nozzle reaches the speed of sound at 0.09MPa. Increasing it beyond 0.09MPa does not change the velocity
0.09MPa is enough
Application examples of Blower
FUJIMARU MACHINERY SOLUTIONS CO., LTD. / フジマルマシナリーソリューションズ㈱
📞 (+66) 65‐964‐9738 ✉ fujimaru@fujimaru-ms.com
address: 525/242 Pracha Uthit Road, Thung Klu, Bangkok 10140 / Tax ID: 0105567106512
Copyright © 2024. All rights reserved. FUJIMARU MACHINERY SOLUTIONS CO., LTD.
Page updated
Report abuse